The DCV-T range of screens is a heavy duty design which removes coarse suspended solids from waste water. This kind of screens can be used for pumping and lifting stations (irrigation, flood control, rain sewerage network), water intakes (cooling water for power plants and refineries), hydro power plants, municipal waste water treatment plants, drinking water plants and industrial water processing.
ADVANTAGES
- No critical mechanical parts in the water
- Silent – No noise pollution
- High lifting capacity per raking
- Low power consumption
- Quick and easy maintenance (access, operations)
OPERATING PRINCIPLE
The DCV-T bar screen is fitted with 3 cables : one on each side for the upwards and downwards movement of the rake, and one central cable for the closing and opening of the rake. The cables roll and unroll on multigroove drums to allow longer life time of the cables.
When a sufficient quantity of screenings has accumulated on the screen, an automatic sequence starts: the actuator (electric, hydraulic or pneumatic, depending on the chosen configuration) lifts the central cable, causing the opening of the rake, after which it descends to the grid.
Once the rake has reached the bottom of the channel, the side cables continue to unroll until they activate a cable slack sensor. This signal closes the rake: the connecting rod lowers the central cable, thereby closing the rake
The closed rake then scrapes the accumulated screenings from the grid and lifts them up to the top of the screen. There, the hydraulic ejector discharges them into a container, a conveyor or a compacting system.
Hydraulic opening/closing system, 100% automated
-
Opening system
-
Closing system
-
Ejector
RANGE
- Frame width from 1360 to 3060 mm
- Discharge height from operation floor channel depth 1000 mm minimum
- Vertical angle of installation
- Fineness of screening 10 mm minimum
- Grid height from 500 to 8000 mm
- Flowrate up to 54 000 m³/h
* fineness of screening = 100 mm, grid height = 8000 mm