The Belt Filter Press OMEGA 100000 is designed for the continuous mechanical dewatering of sludge from medium and large municipal and industrial water treatment plants.
ADVANTAGES
- Optimum space requirement/efficiency ratio
- Visual control of the sludge during dewatering.
- Arrangement of rollers adjusted for higher perfomances
- Length of the belts adapted to obtain a gradual pressing of the sludge and a better
dryness - Easy maintenance and supervision
OPERATING PRINCIPLE
The flocculated sludge flows onto the filtering belt and forms grooves at the intersection of the drainage ploughs which increase the efficiency of the gravity filtration process.
The water contained in the sludge flows through the mesh of the filtering belt. At the end of the gravity thickening zone, a first pressing stage takes place using an adjustable pressing roller. At this stage, the thickening process of the sludge is completed.
At the convergence of the 2 filtering belts, the pressing and rolling process begins using several rollers of different diameters. This allows optimizing dewatering of the sludge while maintaining an optimal capture rate.
The thickened sludge is scraped off the filtering belt and discharged to a sludge thickened pump or a screw conveyor.
RANGE
Belt filter press OMEGA 100000
- Hydraulic flow rate: 6 to 12 m³/h
- Belt width: 1 to 2 meters
- Active drainage surface up to 2.50 m²
- Active pressing surface: up to 7.60 m²