The Belt Filter Press OMEGA NHP is designed for the continuous mechanical dewatering of municipal and industrial sludge.
ADVANTAGES
- Long term reliability thanks to an increased frame structure made of galvanized and stainless steel
profiles - Optimum space requirement/efficiency ratio
- No civil works constraint (machine equipped with adjustable feet)
- New roller configuration for optimised sludge treatment
- Belt length specially designed for a greater progressive sludge pressing for maximum dryness
- Easy maintenance and supervision
OPERATING PRINCIPLE
The flocculated sludge flows onto the filtering belt and forms grooves at the intersection of the drainage ploughs which increase the efficiency of the gravity filtration process.
The water contained in the sludge flows through the mesh of the filtering belt. At the end of the gravity thickening zone, a first pressing stage takes place using an adjustable pressing roller. At this stage, the thickening process of the sludge is completed.
At the convergence of the 2 filtering belts, the pressing and rolling process begins using several rollers of different diameters. This allows optimizing dewatering of the sludge while maintaining an optimal capture rate.
The thickened sludge is scraped off the filtering belt and discharged to a sludge thickened pump or a screw conveyor
RANGE
A wide range of belt presses suitable for any type of sludge, whether urban or industrial.
- Hydraulic flow rate 8 m³/h to 30 m³/h
- Belt width: 1 to 3 meters
- Active drainage surface: 0.90 m² to 3.10 m
- Active pressing surface: 4.30 to 14.40 m²